NX-5200

nx5200_5300

• Encryption Key Zeroize & Retention
• P25 GPS Location
• Over-the-Air Programming*2
DIGITAL – NXDN® MODE
• NXDN® Conventional/Trunking Protocol*1
• AMBE+2™ VOCODER
• 6.25 & 12.5 kHz Channels
• Over-the-Air Alias
• Over-the-Air Programming*2
• Paging Call
• Emergency Call
• All Group Call
• Status Messaging*3
• Remote Stun/Kill*3
• Remote Check*3
• Short & Long Data Messages*3
• GPS Location
• NXDN® Digital Scrambler Included
FM MODES – GENERAL
• Conventional & LTR Zones
• NPSPAC (USA only) Channels (±4.0 Modulation)
• FleetSync®/II: PTT ID ANI / Caller ID Display, Selective
Group Call, Emergency Status / Text Messages
• MDC-1200: PTT ID ANI / Caller ID Display,
Emergency, Radio Check / Inhibit
• QT / DQT & Two-Tone
• Built-in Voice Inversion Scrambler
INTELLIGENT BATTERY SYSTEM (Option)
• System consists of the optional high-capacity Li-Ion
Battery Series (KNB-L1/L2/L3), Rapid Charger
(KSC-Y32), and Battery Reader (KAS-12) software
• Up to 30 Rapid Chargers can be chain-connected to
a PC installed with the KAS-12
• KAS-12 Battery Reader software can display and
manage information including battery type, model
name, voltage, temperature, discharge cycle,
expected life, and remaining capacity
• Up to 1,000 batteries can be managed at a time
(requires an additional option)
FEATURE HIGHLIGHTS
• Multi-Protocol operation in P25 (Phase I&II), NXDN®
and Analog protocols
• Mixed Digital & FM Analog Operation allows
intelligent migration in mixed sites and easy
migration with digital radios in other sites
• Large, Color 1.74″ (240 x 180 pixels) Transflective
TFT Display for better interface even in direct
sunlight and with use of polarized sunglasses
• Easy to follow GUI for at-a-glance operational status
checking and Multi-line Text to convey more information
• 4-way Directional-pad (D-pad) and 2-Position Lever
Switch for intuitive control and operation
• Built-In GPS Receiver/Antenna for effective fleet
management
• Bluetooth® Module built-in for hands-free operation
• Active Noise Reduction (ANR) utilizing built-in DSP with
two microphones for suppression of ambient noise
• Renowned KENWOOD Digital Audio Quality
• Built-in 56-bit DES Encryption
• Optional 256-bit AES Encryption
• Built-in Motion Sensor for life-critical man
down detection
• MicroSD/microSDHC Memory Card Slot for
increased memory capacity for “Voice & Data”
• IP67/68 and MIL-STD-810 C/D/E/F/G
GENERAL FEATURES
• 5 W (136-174 MHz ) Models
• 5 W (380-470, 450-520 MHz) Models
• 3 W (700/800 MHz) Models
• Full Key Models (w/ numeric keypad) and Standard
Key Models (w/o numeric keypad)
• Maximum of 4,000 CH/Radio capacity,
512 CH/Zone,128 Zones
• 1 W Loud Speaker Audio
DIGITAL – P25 MODE
• P25 Conventional Trunking (Phase 1/Phase 2) Protocol
• AMBE+2™ Enhanced Vocoder
• Talk Group ID Lists
• Individual ID Lists
• Caller ID Display
• Remote Monitor/Remote Check
• Radio Inhibit
NX-5200/5300/5400
NEXEDGE® VHF/UHF / 700-800MHz
MULTI-PROTOCOL DIGITAL & ANALOG PORTABLE RADIOS

http://jvckenwood.com

*1 Only supports TYPE-C Protocol
*2 Requires KENWOOD OTAP Management software.
*3 Requires NX subscriber unit PC serial interface compatible
software application (e.g. KENWOOD AVL & Dispatch Messaging
software) or hardware (e.g. console).
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Options